Basic Info.
Body Material
Sic Metal Cordierite
Discharge Standard
Euro V
Noise Source
The Noise of Engine
The Noise of Engine
Mechanical Noise
Automobile Chassis Noise
The Brake Noise
Component
Catalytic Converter
Specification
190*200mm, 286*305mm, 224*305mm etc
Product Description
Diesel particulate filter is also called Diesel Particulate Filter (DPF).The filtration material researched and used in China at present is of three types: Ceramic, metallic and composite based. The common types are ceramic based (cordierite or silicon carbide) and metallic based (stainless steel wire mesh) diesel particulate filter.The main composition of tail gas discharge from diesel is carbon particulates. Diesel particulate filter is a setting to reduce emission granule by filtrating which is set in exhaust system in diesel. Its efficiency for carbon particulates filtration is more than 90%. Part of dissoluble organic composition (SOF) (especially high boiling point) may be trapped. Plugging up two ends of porous beehive ceramic in turns to filtrate PM by ceramic wall.Regeneration of filter: Burn the particulates by rising the gas temperature in filter to filtrate PM which piled in the filter so as to guarantee the function of filter. The character of particulates in exhaust gas of diesel relates to concentration of oxygen. It will burn in temperature of 550-650° C.Sic-based Diesel Particulate Filter is a high-tech product. It is mainly used to produce new generation of diesel clean & emission system to fulfill the carbon particulate cleaning target of the EUIII, EUIV standardsWorking principle for Sic-based Diesel Particulate Filter: It can reduce 96.5% carbon particulates emission by holding up the carbon particulates in tail gas of diesel at first, then clear up carbon particulates by means of electric heat, fuel burner etc., finally to meet carbon particulate emission standards.Diesel Particulate Filter adopts structure of honeycomb. It sets up independent opening and blocking up passages in both ends and the waste gas enters from one open end, then goes through the porous beehive wall, and finally discharges from adjoining passage. The carbon particulates are left over on passage wall because they are too big to pass through wall hole and won't be discharged to air.1. Diesel Particulate Filter substrate: Our DPF subsrtate was an economic porous wall flow type ceramicFilter is also available for diesel particulate mater removal called diesel particulate filter.Such a ceramic filter is made from modified cordierite ( 2MgO-Al2O3-5SiO2), our DPF enable highly efficientParticulate matter trap systems by offering:*Low thermal expansion*High filter specific surface area*Low pressure drop*Long-term durability performance*High soot removal: >95.4%*This product was only the carrier for the Catalyzed diesel particulate filter (CDPF) as below.2. Catalyzed diesel particulate filter (CDPF)Catalyzed diesel particulate filters are the solution for diesel particulate matter control. >95% PM filtrationEfficiency and low regeneration temperature are achieved through the combination of wall flow type ceramicHoneycomb with patented catalyst formulation. In additional of PM reduction, catalyzed diesel particulate filter isAlso reducing carbon monoxide and hydrocarbon from engine exhaust stream.Current product offer covers from 2.5 liters (5.66x6") to 25 liters (11.25x15") as a single CDPF which would bePerfect solution for diesel engine displacement from 2 to 20 liters.Key characteristics of BHLJ catalysts include:*Low pressure drop*Excellent performance*Self-regenerationunder special conditions*Can be applied to on-road and off-road diesel engines*Can be provided in a standard or custom configurationsSize(Diameter × length) Filter volume(Liter) Cell density Shapemm InchesΦ 70 × 152 Dia.2.76 × 6 0.58 100/200CPSI RotundityΦ 144 × 152 Dia.5.66 × 6 2.48 100/200CPSI RotundityΦ 144 × 205 Dia.5.66 × 8 3.34 100/200CPSI RotundityΦ 144 × 254 Dia.5.66 × 10 4.13 100/200CPSI RotundityΦ 144 × 305 Dia.5.66 × 12 4.96 100/200CPSI RotundityΦ 170 × 254 Dia.6.69 × 10 5.76 100/200CPSI RotundityΦ 190 × 200 Dia.7.48 × 7.87 5.67 100/200CPSI RotundityΦ 228 × 152 Dia.8.97 × 6 6.20 100/200CPSI RotundityΦ 228 × 254 Dia.8.97 × 10 10.37 100/200CPSI RotundityΦ 228 × 305 Dia.8.97 × 12 12.45 100/200CPSI RotundityΦ 240 × 240 Dia.9.45 × 9.45 10.85 100/200CPSI RotundityΦ 240 × 254 Dia.9.45 × 10 11.48 100/200CPSI RotundityΦ 240 × 305 Dia.9.45 × 12 13.79 100/200CPSI RotundityΦ 260 × 305 Dia.10.23 × 12 16.19 100/200CPSI RotundityΦ 270 × 305 Dia.10.63 × 12 17.45 100/200CPSI RotundityΦ 286 × 305 Dia.11.26 × 12 19.58 100/200CPSI Rotundity(98 × 195) × 154 (3.8 × 7.7) × 6 2.60 100/200CPSI Race track(98 × 195) × 205 (3.8 × 7.7) × 8 3.50 100/200CPSI Race track(98 × 195) × 254 (3.8 × 7.7) × 10 4.30 100/200CPSI Race track(98 × 195) × 305 (3.8 × 7.7) × 12 5.20 100/200CPSI Race track
Address:
Room 17, Shiyuan Cultural Plaza, Xincun West Road, Zhangdian District, Zibo, Shandong, China
Business Type:
Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Chemicals, Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
Our GROUP included three company. One is professional production DPF DOC SCR products.
One main produce zsm-5 zeolite beta zeolite ssz-13 zeolite y zeolite sapo-34 zsm-22 zsm-35 etc.
One is professional catalyst chemical products.
